The design used the experience gained in establishing the 9-meter ocean racing yachts «BlackSea30» ( «Daughter of the wind» V. languages)

In the cruise was extended version (in the nose and aft) and extended cockpit. The reconfiguration of the cockpit, the possibility of installing a stationary engine (Yanmar saildrive). One man can manage a boat with not too much efforts from the steering seat

Description

Pluto is cruise-racing yacht, was built in conformity with rules of O800 racing class.

Project :Nazarov Yacht Design

Builder: AWL boatyard

Location: Ukraine, Sevastopol

Material of body - fiberglass plastic

CE category - C

Technical data:

LOA =8.00 m

BOA = 2,55 m

Draft = 1,5/2.0 m

Displ. = 1.4 t.

Keel - 400 kg. (lead pylon)

Fresh water tank - 70 L.

Fuel tank - 30 L.

Weight on trailer - 1400 kg

Sails:

Main - 26 m?

Staysail - 13.4 m?

Gennaker - 60 m?

Accomodations:

saloon and separate forecabin

galley: gimbal stove 2 burns,

sink head

Engine:

Yanmar 9 Saildrive,

Yanmar 14 HP. Saildrive

Equipment:

GPS/Radar

VHF Radio

Compass

Depth sounder

Bilge pumps

Navigation Lights

The body is made in three versions:

1) The easiest, the hard high heat isolating and good properties sandwich construction, manufactured using vacuum forming in the matrix. (Currently, preparations for the production method of infusion that will improve the quality of the shell and reduce his weight) As a sandwich filling used high-strength foam Airex C70.75. Outer covering of the shell-polyester gelcout high resistance. The bottom deck and have the same design. Bottom flora and kelson made of fiberglass and have a P-shaped profile. The most expensive option.

2) Option to the deck as described above, and the bottom monolithic FRP. The thickness of plastic on the bottom 6-12mm.

3) Economy version, deck and bottom are made of cast fiberglass. Windows may be deaf 6mm thick polycarbonate or opening in an aluminum frame (Lewmar). For all options shells steering feathers made vacuum fiberglass Boxes steering feathers made contact method for forming fiberglass. The hoisting tip can be produced in two versions: Profile FRP with a fixed wing on the lead bulb. The application allows you to shift bulbous keel yachts lower center of gravity, thus reducing the bank. Inside accommodation shell can be made of marine plywood, veneering precious varieties of wood, a sandwich panels. Rigging profile Z-spar. Deck equipment Harken.